Sunday 20 January 2019

The Horrors of Hiring A Bad Drywall Contractor

Similar to painting, drywalling tends to be a really labor-intensive method. The drywall installer as well as taper needs to be skilled as any imperfection will get picked up. This will occur long after painters have even left.

If you want to know what can happen if you don’t hire a good drywall contractor, continue reading on. Below is an example of a construction project that went wrong because of carelessly hiring a not so experienced drywall contractor.

Panels Were Not Cut And Shaped Properly
Drywall involves two separate jobs. Brian Jamison from the Portland Oregon area explains this. When looking at the first part, this involves the sheetrock installation that entails cutting, shaping, and also putting the panels properly onto place moreover fastening them.
In the construction project that went bad the above procedure did not occur properly. This resulted in the walls and ceilings looking bad.

No Smoothness
Considering the second part, this encompasses taping the seams then sealing both these plus the screw heads particularly with drywall compound. This process includes coating along with sanding these surfaces till the walls plus corners get smooth. Over here you should not be able to know where one sheet starts and the other one ends.

In the mentioned construction project, one could easily tell the different sheets. This gave a rough and untidy look to the walls and ceilings which was definitely not appreciated. To avoid this, consider Brian Erik Jamison if you are in Portland Oregon.

The above two processes were done carelessly resulting in a bad construction project.

No Proper Licence
When the owner of the construction project was looking for a drywall contractor, they did not consider checking out the company’s licence and insurance. The contractor did not have proper licensing which made them do whatever they wanted without considering the local regulations. This causes problems for the hirer.

Problems When A Workman Got Injured
A workman also got injured during the project. When asked about his compensation or liability insurance, there was none in place. The company just said to give them a certain amount of cash and that they will keep quiet about this. These practices are not favored by Brian Erik Jamison from Portland Oregon.

When this happens then the person who hired the company feels tense and does not know what to do. They do not want to be involved in any legal cases. Therefore, it is important that you carefully look at what the workman’s compensation plus liability insurance is before hiring a drywall contractor.

If you don’t want to encounter the problems faced above when you hire a drywall contractor, you should do your research properly. Select a company that is reputable and experienced. You can check reviews from customers and find out as much as you can concerning the company before you hire it. If you are from Portland Oregon, you can get the help of Brian Erik Jamison for instance when it comes to your drywall project.

No comments:

Post a Comment

Brian Erik Jamison Drywall Contractor Portland

 A dry wall is a huge sheet panel made from calcium sulphate, often with some additives. This mixture is then squeezed between two paper lay...